MEG (Mono Ethylene Glycol) is usually used as a gas hydrate inhibitor, and it is essential to regenerate and re-inject this into well because great amount of MEG is consumed to control gas hydrate. Therefore, MEG regeneration process is installed in LNG FPSO, and used MEG is regenerated from this. It is important to know the salts equilibrium under MEG regeneration conditions in order to prevent problems related to deposition and scale precipitation. We conducted experiments and process simulations. Through the simulation, we simulated energy consumption at each regeneration concept and analyzed optimum condition at pre-treatment zone. Also, we did simulation on low soluble salts deposition with ELECNRTL model. We measured density, conductivity, pH through experiments. In the experiment, we measured the property that high soluble salts, NaCl and low soluble salts, CaCO3 have in MEG solution. Measurement value and simulation value were compared and analyzed. In (CO2 + water) system or (CO2) system, it was possible to predict from the simulation. But in the system with coexisting CaCO3, CO2, and MEG, we figured that the simulation result needs to be adjusted through experiments. In this paper, we conducted simulations and experiments on temperature, pressure condition (MEG, CO2, CaCO3, NaCl) of MEG regeneration.
본 논문에서는 LNG FPSO에 설치되는 MEG Regeneration 공정에 대하여, Aspen Plus를 이용한 공정모사와 실험을 통해서 시스템을 정의하고 설계하였다. MEG는 해양플랜트에서 Hydrate 방지를 위해 사용된다. 고농도로 주입된 MEG는 탑 상부에서 물과 물에 포함된 염과 함께 회수되는데, 회수된 용액에서 물과 염을 분류하여 다시 고순도의 MEG를 만드는 공정을 MEG Regeneration 공정이라 한다. 본 연구에서는 공정모사를 통하여 두 가지 다른 방식의 MEG Regeneration 공정의 에너지 소모량을 분석하였고, 특히 저용해도 염을 제거하는 전처리 공정에 대한 분석을 하였다. 실험을 통하여 MEG 용액의 밀도, 전도도, pH를 측정하였다. 실험에는 대표적인 고용도 염인 NaCl 과, 대표적인 저용해도 염인 CaCO3 를 사용하였다. 실험을 통해 얻은 결과값을 공정모사를 통해 얻은 결과값과 비교 분석하였다. MEG 농도와 NaCl농도를 바꾸면서 다양한 조건에서 값을 측정하였다.