Part I: The study on the growth of Ag on Pt(211) surface.
The growth properties of ultrathin silver films deposited onto Pt(211) surface were studied using Auger electron spectroscopy(AES), low-energy electron diffraction, and x-ray photoelectron spectroscopy. AES studies indicate that the growth of Ag on Pt(211) proceeds via layer by layer mechanism. The electron-diffraction pattern of clean Pt(211) surface persists as the film grows until a coverage of 4 monolayer with no extra reflex appeared. The Ag 3d core-level binding energy of Ag on Pt(211) shifts toward lower binding energy relative to the value of Ag with decreasing Ag coverage, which is attributed to the initial-state band-narrowing effect.
Part II: The structure of Na/Si(111)-3X1 surface by tensor LEED
In this work, we studied the structures of Na/Si(111)-3X1 surface utilizing tensor LEED(Low-energy Electron Diffraction) analysis. Tensor LEED is a perturbation method for calculating LEED I-V curves in which an initial reference structure is displaced. First, it calculates changes in the t-matrix of the atom produced by displacing from their reference position as well as the diffraction intensity for the reference structure, which are used to do multi-dimensional optimization between experimental and theoretical I-V curves. With a suitable choice of reliability factor, we can get a set of atomic coordinates that gives a best fit between the two I-V curves.
반도체나 금속의 표면에서 원자들이 어떤 방식으로 배열되어 있는가 또는 다른 원자들이 다가갔을때 어떤 모양으로 자라는가 하는 문제들은 이들이 실제 산업에 응용될 때 그 유용성을 결정하는 많은 성질들을 아는데 매우 중요하기 때문에 최근 20년간 많은 연구가 되어지고 있다. 이러한 일련의 관심의 대상 중의 하나가 실리콘(111) 표면의 원자구조에 대한 연구이다. Si(111)-7X7 표면은 소량의 나트륨을 열에 의한 증발을 이용하여 증착시킨 후 낮은 온도로 열처리를 하면 3X1 표면으로 재배열이 된다. 그때 이 재배열된 표면은 알칼리 금속의 종류에 관계없이 같은 3X1 모양을 보여주기 때문에 그 증착된 양에 대한 연구와 아울러 그 원자 단위의 배열이 어떻게 이루어 졌는가에 대한 연구가 많이 진행되어 왔다. 이 논문에서는 LEED(저에너지 전자 회절) IV 분석 방법을 통하여 Na/Si(111)-3X1 표면의 원자 구조를 연구한 결과를 보고하였다.
Ag/Pt 또는 Pt/Ag 계는 탄화수소 전환 반응의 촉매로서 중요성 때문에 많이 연구가 되어지고 있다. 이때 백금 덩어리 표면에서 은(은)이 어떤 모양으로 분포되어 있는가 하는 문제는 촉매로서의 활성과 선택성을 결정하는 아주 중요한 요인이 된다. 따라서 백금 표면 위에 은(은)을 열증발을 이용하여 증착하였을때 그 성장 과정을 이해 하는 것은 매우 중요한 연구 과제라고 할 수 있다. 이 일환으로 Pt(211) 표면위에 은(은)층의 초기 성장과정에 대해 XPS, LEED, AES를 이용하여 연구하였다.