서지주요정보
고체 매질을 이용한 고차조화파 생성 및 제어 = Generation and manipulation of high harmonics from solids
서명 / 저자 고체 매질을 이용한 고차조화파 생성 및 제어 = Generation and manipulation of high harmonics from solids / 김현웅.
발행사항 [대전 : 한국과학기술원, 2018].
Online Access 원문보기 원문인쇄

소장정보

등록번호

8032597

소장위치/청구기호

학술문화관(문화관) 보존서고

DME 18063

휴대폰 전송

도서상태

이용가능(대출불가)

사유안내

반납예정일

리뷰정보

초록정보

In this thesis, HHG in the EUV wavelength range is generated from bulk solid dielectric material. By using the proper properties of HHG and fabricating the surface of the solid, manipulation of propagation characteristic of generated HHG such as focusing and steering is achieved. Measured HHG spectra from MgO crystal shows up to 17th order of harmonic whose wavelength is ∼47 nm when irradiated by the femtosecond laser with the intensity of ~$10^{12}%W/$cm^2$, 12 fs pulse width and 800 nm center wavelength. The generated EUV shows sufficiently high coherence in the double slit experiment and the stable photon flux above 107 photons per second without causing drastic thermal damage on the surface of crystal. Based on these characteristics of EUV from solid material, the free space propagation of EUV can be steered and focused by modifying surface shapes of bulk solid in sloped and cylindrically curved surface. Moreover, the results did not show chromatic splitting even though each order of harmonics has different wavelengths. Since this bulk solid based EUV source technology does not require additional optics in order to be applied to various EUV applications, all these experimental findings demonstrate a promising possibility of achieving simple and efficient EUV sources for various EUV applications requiring high spatial resolution of nanometer scale, such as imaging, microscopy, lithography and spectroscopy.

본 연구에서는, 고체 매질을 이용하여 극자외선의 고차조화파 생성하고, 그 특성을 이용하여 추가적인 광학계 없이 고체 매질의 표면 가공만으로 극자외선의 전파 특성 변조 및 집광 기술을 개발하였다. 800 nm 의 중심 파장과 12 fs 의 펄스폭을 갖는 레이저를 약 $10^{12}%W/$cm^2$ 의 세기로 고체 매질의 표면에 입사시켜 생성된 고차조화파는 MgO 크리스탈에서 약 47 nm 의 파장을 갖는 극자외선인 17차 고차조화파까지 생성되었다. 생성된 극자외선은 매우 높은 수준의 결맞음성을 가지며, 장시간 동안 안정적으로 초당 총 107 개 이상의 극자외선 광자가 유지되었다. 그리고 이러한 고체 매질에서 생성되는 극자외선의 특성을 바탕으로 고체 매질의 표면을 경사면, 그리고 곡면으로 가공하여 극자외선의 전파 특성을 조절하였다. 먼저 고체 매질의 표면에 경사면을 가공하여 해당 표면에서 생성되어 전파하는 극자외선은 각각의 차수에 따라 파장에 차이가 있음에도 색채 분할을 나타내지 않고 입사 레이저와 동일한 각도로 굴절되어 모두 평행을 이루며 진행하는 것을 확인 하였다. 그리고 색채 분할이 일어나지 않는 점을 이용하여 고체 매질의 표면을 곡면으로 가공하여 해당 표면에서 생성된 극자외선을 렌즈를 사용한 것과 같이 집광되며 전파하는 것을 확인하였다. 본 연구의 결과는 극자외선 응용 분야에서 기존의 광학계 제거하고 그 효율성을 극대화 시켜줄 수 있기 때문에 극자외선 이용한 이미징, 가공, 분광 등의 나노 수준의 공간 분해능을 요구하는 다양한 분야에 널리 적용될 것으로 기대된다.

서지기타정보

서지기타정보
청구기호 {DME 18063
형태사항 iv, 77 p. : 삽화 ; 30 cm
언어 한국어
일반주기 저자명의 영문표기 : Hyunwoong Kim
지도교수의 한글표기 : 김승우
지도교수의 영문표기 : Seung-Woo Kim
학위논문 학위논문(박사) - 한국과학기술원 : 기계공학과,
서지주기 참고문헌 : p. 72-77
QR CODE

책소개

전체보기

목차

전체보기

이 주제의 인기대출도서