서지주요정보
Mn-Zn-Fe ferrite 계 재료의 자기적 성질에 관한 연구 = Magnetic properties of the materials in Mn-Zn-Fe ferrite system
서명 / 저자 Mn-Zn-Fe ferrite 계 재료의 자기적 성질에 관한 연구 = Magnetic properties of the materials in Mn-Zn-Fe ferrite system / 안병태.
발행사항 [서울 : 한국과학기술원, 1979].
Online Access 원문보기 원문인쇄

소장정보

등록번호

4000634

소장위치/청구기호

학술문화관(문화관) 보존서고

MMS 7910

휴대폰 전송

도서상태

이용가능(대출불가)

사유안내

반납예정일

리뷰정보

초록정보

The effect of the chemical composition and sintering temperature on magnetic properties of Mn-Zn-Fe Ferrite system were investigated. The composition of specimen can be expressed by $Zn_{0.40}^{2+} Mn_{0.60-x}^{2+} Fe_x^{2+} Fe_2O_4$ and the values of x were selected from 0 to 0.31. Specimens of each composition were sintered at 1300℃ and 1350℃ for 3 hours in equilibrium atmosphere and cooled in nitrogen atmosphere. The highest initial permeability at room temperature was obtained in the composition $Zn_{0.40}^{2+} Mn_{0.52}^{2+} Fe_{0.08}^{2+} Fe_2O_4$ which has nearly zero magnetocrystalline anisotropy constant and small magnetostriction constant at room temperature. Permeability of the specimen sintered at 1350℃ was higher than that sintered at 1300℃ in the case of small magnetic anisotropy but permeabilities of the specimens sintered at 1300℃ and 1350℃ were similar in the case of large magnetic anisotropy. Magnetocrystalline anisotropy compensation point, To, was shifting to lower temperature with increasing $Fe^{2+}$ ions, up to x = 0.16, then was shifting back to higher temperature with further increase of $Fe^{2+}$ ions. The lowest coercive force was obtained in the composition $Zn_{0.40}^{2+} Mn_{0.54}^{2+} Fe_{0.06}^{2+} Fe_2O_4$ sintered at 1350℃.

$Zn_{0.40} Mn_{0.60-x} Fe_x^{2+} Fe_2O_4$ system에서 조성과 소결온도를 변화시켜 자기적 성질의 변화를 연구하였다. x의 값은 0에서 0.31까지 변화시켰으며 Paulus와 Morineau의 평형 diagram을 이용하여 stoichiometry를 맞추어 주었다. 소결밀도는 x가 증가함에 따라 증가하였는데 이는 이론밀도가 더 높은 $Fe_3O_4$가 고용체를 이루기 때문인 것 같다. 상온에서 가장 높은 투자율은 x = 0.08인 조성에서 얻어졌는데 그 이유는 상온에서 $K_1 = 0$이고 $λ_s$가 0에 가까운 조성이기 때문이다. $K_1= 0$인 조성에서는 1300 ℃와 1350 ℃의 소결밀도는 거의 비슷하나 투자율은 크게 차이가 나는데 이것은 grain size의 영향 때문이라고 생각된다. $K_1 = 0$ 인 조성에 있어서는 domain wall displacement가 grain boundary와 grain 내부의 커다란 void에 의해서 영향을 받게 되므로 grain이 클수록 domain wall displacement가 쉬워 투자율이 증가하게 될 것이다. 반면에 $K_1$이 큰 조성 (x = 0.16, 0.21, 0.31) 에서는 1300 ℃와 1350 ℃의 소결밀도차는 크나 투자율은 비슷했다. 이것은 domain wall의 두께가 얇아져 grain 내부의 pore에 의해서 wall motion이 방해를 받기 때문이며 이 경우에는 grain size의 영향이 줄어드는 것 같다. 투자율의 온도특성곡선에서 x가 0.16정도까지 증가할 때는 SMP peak가 낮은 온도쪽으로 이동하였으나 x가 더욱 증가할 때는 다시 높은 온도쪽으로 이동하였다. 이것은 양의 자기이방성계수를 가진 Fe 와 음의 자기이방성계수를 가진 ferrite에 의해 생기는 보상점이 이동하기 때문인 것 같다. x가 증가하면 Curie 온도는 증가하였는데 이는 Curie 온도가 더 높은 $Fe_3O_4$가 고용체를 이루기 때문이라고 생각된다. 보자력은 x=0.06인 조성에서 가장 낮게 나타났는데 이유는 $K_1$과 $λ_s$가 거의 0에 가깝기 때문인 것 같다. magnetic spectra에서 x=0.06인 조성의 cut-off frequency는 약 500KHz이고 다른 조성들의 cut-off frequency는 약 700KHz였는데 Mn-Zn ferrite의 resonance mechanism은 domain rotation과 현미경 조직에 의해 영향을 받는 domain wall relakation의 복합작용이라고 생각되어진다.

서지기타정보

서지기타정보
청구기호 {MMS 7910
형태사항 iii, 46 p. : 삽화 ; 26 cm
언어 한국어
일반주기 저자명의 영문표기 : Byung-Tae An
지도교수의 한글표기 : 임호빈
지도교수의 영문표기 : Ho-Bin Im
학위논문 학위논문(석사) - 한국과학기술원 : 재료공학과,
서지주기 참고문헌 : p. 43-46
주제 Ferrites (Magnetic materials)
Magnetic properties.
Permeability.
페라이트. --과학기술용어시소러스
자기적 성질. --과학기술용어시소러스
화학 조성. --과학기술용어시소러스
투자율. --과학기술용어시소러스
QR CODE

책소개

전체보기

목차

전체보기

이 주제의 인기대출도서