Asymmetrically substituted poly (2-methoxy-1,4-phenylene vinylene) and PPV copolymers were synthesized via water-soluble precursor route. Sythesized polymers were characterized by NMR, thermogravimetry (TGA, DSC), IR and UV-VIS spectrophotometry. The actual compositions of the copolymers were determined by elemental analysis. And their electrical conductivities were measured by four-probe method at room temperature after $I_2$ or $FeCl_3$ doping. The more portion of PPV polymers contained, the higher conductivity they appeared. The conductivity of $I_2$ doped PMPV (undrawn) was 1.3 S/cm. The maximum conductivity of $FeCl_3$ doped PMPV was 4.0 S/cm and copolymers ranged from $10^{-1}-10^2$S/cm. For all the samples, conductivity increased with temperature, which is usually observed for semiconductors. Activation energy for conduction was estimated from the Arrehenius plot of log(R) versus $T^{-1}$. Activation energy of $FeCl_3$ doped PMPV (stretched) was 96 meV. The conductivity data were plotted against $T^{-\frac{1}{4}}$ and each curves showed a straight line relation. Such behavior is expected for the systems where variable range hopping mechanism applies. $\chi^{(3)}$ value of PMPV was measured by degenerate four-wave mixing (DFWM) technique and calculated value was 6.9 × $10^{-10}$ esu at 602 nm.
비대칭적으로 치환된 폴리 (2-메톡시-1,4-페닐렌 비닐렌)과 이것의 PPV 공중합체들을 물에녹는 선중합체를 거쳐 합성하였다. 합성된 중합체들을 열분석 (DSC,TGA)과 IR 및 UV-VIS 분석을 통하여 특성을 조사하였고 공중합체의 실제 조성비는 원소분석을 통하여 알수 있었다. 전기전도도는 $I_2$ 와 $FeCl_3$로 도핑한 후에 실온에서 4-탐침법으로 측정하였다.
PMPV와 공중합체들은 PPV와는 달리 $I_2$와 $FeCl_3$로 쉽게 도핑되었으며, 공중합체의 경우 PPV의 함량이 높을수록 높은 전기전도도를 나타내었다. $I_2$로 도핑시킨 PMPV의 전도도는 1.3 S/cm 였다. $FeCl_3$ 도핑시킨 PMPV의 전도도는 4.0 S/cm 였고 공중합체는 $10^{-1}$ 에서 $10^2$ S/cm의 범위에서 최대 전도도를 나타내었다. 전기전도도의 온도 의존성을 연구하였으며 모든 중합체들은 온도가 증가함에따라 전도도가 증가하는 경향을 보였다. 이것으로 중합체들이 반도체적 성질을 나타냄을 알수 있었다.
전기전도에 필요한 활성화 에너지를 아레니우스 관계식으로 부터 계산하였으며 $FeCl_3$-도핑시킨 PMPV의 활성화 에너지는 96 meV였다. 전기전도도를 $T^{-\frac{1}{4}}$에 대해 도시했으며 직선 관계가 성립하였다. 이러한 경향으로부터 다양한 범위에서 호핑 메카니즘에 의해서 전도됨을 예측할수 있었다.
PMPV의 $\chi^{(3)}$값을 Degenerate Four-Wave Mixing을 이용한 방법으로 측정했으며 계산된 값은 602 nm에서 6.9 × $10^{-10}$ esu 였다.