The Skip mode of H.264/AVC is a coding mode reconstructed only by the prediction signal, and is the coding mode having the smallest bits compared to other modes. The Skip mode cannot deal with the occurrence of illumination change at the current block because it is reconstructed only by the prediction signal. Also, the Skip mode is the coding mode having the largest distortion compared to other modes. To solve the illumination change problem of the Skip mode and to reduce the distortion of the Skip mode, we propose a novel offset compensation method, which applies the estimated offset compensation to the Skip mode only. In the proposed method, flag bit is not used for the offset because the incorrectly estimated offsets are mostly filtered out through the rate distortion optimization based mode decision process. Since only a semantic change is required for the Skip mode in the proposed method, the proposed Skip with offset mode (SWO) can be easily replaced with the Skip mode of H.264/AVC. The proposed SWO method shows better coding performance than previous methods, including the weighted prediction (WP) method of H.264/AVC.
H.264/AVC비디오 부호화 표준에서 스킵 부호화 모드는 예측 신호만으로 복원이 되는 모드이며, 모드 구분 정보만을 가짐으로 비트율이 가장 작은 부호화 모드이다.
현재 블록에 조명 변화가 발생할 경우 스킵 모드는 예측 신호만으로 복원되므로 전혀 대응할 수 없는 문제점이 있다. 또한, 스킵 모드는 예측 신호만으로 복원되므로 신호 왜곡이 다른 부호화 모드에 비해 가장 큰 모드이다. 본 논문에서는 스킵 모드가 가지고 있는 조명 변화 문제와 스킵 모드의 신호 왜곡을 개선하기 위해 스킵 모드에서만 예측 오프셋 보상을 적용하는 방법을 제안하였다.
제안 방법에서는 잘 못 예측된 오프셋 효과를 줄이기 위한 플래그 비트를 사용하지 않았다. 대신 율-왜곡 최적화 기반 모드 결정 과정을 통해서 잘 못 예측된 오프셋이 적용된 스킵 부호화 모드가 오프셋이 적용되지 않은 다른 부호화 모드들과의 경쟁에서 뒤쳐지도록 하였다. 즉, 잘 못 예측된 오프셋이 적용된 스킵 부호화 모드 대신 오프셋이 적용되지 않은 다른 부호화 모드가 선택되도록 하여, 오프셋으로 인해 발생할 수 있는 최대 손실이 제한되도록 하였다. 제안 방법은 스킵 모드에서 만 오프셋 보상 방법을 적용하므로, 큰 복잡도 증가 없이 부호화 성능을 향상 시켰으며, 특히 조명 변화가 있는 비디오 시컨스에서는 H.264/AVC 의 조명 보상 기법인 가중치 보상 방법보다 크게 향상된 결과를 보였다.