The efficient upgrading of vacuum residue to the lighter and more valuable products have attracted importance because of indispensable demand for light oils and stringent environmental protection laws. Slurry phase hydroprocessing is one of the efficient cracking techniques. The transition metal sulfides are considered as very good hydroprocessing catalysts. Molybdenum sulfide and cobalt promoted molybdenum sulfide nanosheets were synthesized by hydrothermal method, characterized by XRD, TEM and BET analysis and used as catalysts for slurry phase upgrading of petroleum vacuum residue. Catalysts efficiency was evaluated on the basis of conversion of vacuum residue, desulfurization, denitrogenation, and distillate yield and coke formation. We found that molybdenum sulfide nanosheets has shown very good results in hydrocracking and processing of vacuum residue and promotion of cobalt on molybdenum sulfide nanosheets has improved its processing activity. The higher activity was due to the efficient movement of nanosheets through the asphaltene molecules and promotion of cobalt. The liquid products were analyzed by elemental analysis, NMR and GC-SIMDIS analysis.
Hydrocracking and processing was also performed over molybdenum sulfide nanosheets by using water instead of hydrogen gas as it is an expensive and dangerous gas. Several reactions were performed by varying operating conditions such as temperature and amount of water. Molybdenum sulfide nanosheets has shown good yield of liquid product.
몰리브덴의 황화물과 코발트 몰리브덴의 황화물의 nanosheets는 수소와 물의 존재에 균열 및 진공 잔류물 처리를위한 촉매제로 사용되었다. 몰리브덴의 황화물은 발기인으로 사용되었으며, 분산 레이어 (Nanosheets)와 코발트 [CO = (5-30)mol%]의 형태로 쉽고 비용면에서 효율적인 열수 방법에 의해 합성되었다. 촉매는 XRD, TEM 및 BET 분석을 하였다. 진공 잔류 업그레이드 반응이 다른 촉매를 사용하여 (온도, 압력, 수소와 물의 양을) 서로 다른 조건에서 수행되었으며 진공 잔류 균열로부터 얻은 제품은 원소 분석, GC-SIMDIS 및 NMR 분석에 의해 분석되었다. C, H, S와 N의 수량은 모든 제품에서 산출된 것이다. 촉매 및 운영 조건의 집단들 사이에 더 나은 촉매 및 운영 조건 fA, HAU / CA 및 BI 값으로, 점도 감소, 변환 및 탈황 및 denitrogenation 자신의 가치관을 기반으로 선정하였다. 실험 결과의 모든 이들 기지에 비교되었을 때, 코발트는 (CO = 10mol %)를 430에서 몰리브덴의 황화물의 nanosheets을 430˚C에서 더 나은 결과를 보여주었다.
MoS2 nanosheets 촉매는 물에서 아주 좋은 균열 결과가 나타났다. 석유 제품의 금액은 hydrocracking 결과와 비교했으며 MoS2 nanosheets 이상의 물의 균열은 MoS2 다공성 촉매 이상의 수소와 보다 나은 증류액 수율을 보이지 않고있다.
그것도 슈퍼 임계 조건 아래에서 인상적인 결과를 보여주었으므로 MoS2 nanosheets는 슈퍼 핵심 조건 위의 물로 개선 균열 효율성을 표시할 수 있다.