In the mobile wireless networks which use a battery as a power, because of limitation of battery capacity, reducing energy consumption is the important issue. This is also essential in the mobile ad hoc network that is composed of only stations without base station as an access point. This day, IEEE 802.11 Wireless LANs are widely deployed and exponentially grown. In the IEEE 802.11 power saving mode specified for DCF which can make ad hoc network, time is divided into Beacon Intervals to synchronize nodes and to be able to exchange data each other. At the start of each Beacon Interval each node in the power saving mode periodically wakes up for a duration called the ATIM Window. During the ATIM window, the nodes exchange control packets to determine whether they need to stay awake for the rest of the Beacon interval. In this thesis we suggest a Synchronized Hello Exchange Mechanism improve IEEE 802.11 DCF-PSM in Mobile Ad-hoc Network. When IEEE 802.11 Power Saving Mode works with AODV, Power Saving Mode would be inefficient. PSM turn off the power of RF antenna when a node does not have any data to transmit or receive. However, in AODV, a node may determine connectivity by listening for hello packet from the neighbors. In stand-by state, because of the periodical local connectivity information exchange, nodes do not go into doze state, regardless of no data to transmit or receive. The node would dissipate the power staying in awake state. To solve this problem, we propose a Synchronized Hello Exchange Mechanism which makes distributed hello packet exchange synchronize. This proposal improves the performance of IEEE 802.11 PSM in stand-by state.
Wireless Network Interface 가 사용되는 모바일 기기들은 배터리 파워에 의존하여 동작함에 따라 무선랜 카드의 에너지 소모량을 줄이는 것이 중요한 이슈가 되고 있다. 그렇기 때문에 언제 어디서든 장소에 구애받지 않고 네트워크가 형성될 수 있는 Ad-hoc network 역시 효율적인 에너지 소비정책은 중요한 이슈가 된다.
본 논문은 크게 두 부분으로 나뉜다. 먼저, IEEE 802.11 DCF-PSM으로 동작하는 무선랜 카드를 장착한 여러 개의 노드가 Ad hoc network 를 형성하고 있을 때, 이 노드들이 AODV 라우팅 프로토콜을 사용하고, 또한 Link Connectivity 를 제공하기 위해 AODV 에서 제공하는 Hello packet exchange 방법을 사용하면, Ad-hoc network에 속해 있는 노드들의 IEEE 802.11 DCF-PSM 의 성능이 저하되는 문제점이 있다는 것을 밝히고 이를 수식적으로 분석하여 어느 정도의 성능저하가 일어나는지를 보여준다. 성능 저하의 원인은 각 노드의 Hello packet 이 분산되어 전송되기 때문에 Hello packet 을 전송하거나 수신하는 노드들은 IEEE 802.11 DCF-PSM 의 doze state 가 되지 않고 awake state 가 되기 때문이다.
다음으로 위의 문제점을 해결하기 위해 분산된 Hello packet 의 전송을 정해진 규칙에 의해 같은 Beacon interval 에서 contention 에 의 해 모든 노드가 전송할 수 있는 SHEM 이라는 새로운 방법을 제안하였다. 이 방법은 라우팅 계층과 MAC 계층간의 문제점을 해결하기 위해 각 계층의 중간 위치에서 두 계층의 동작을 원활하게 하는 것이다. 우리가 제안한 방법의 장점은 새로운 카운터 두 개를 정의하여 그 정보를 Beacon message 의 frame body 에 추가시킴으로써, 구현이 간단해진다는 것이다. 게다가 정보가 추가된 수정된 Beacon packet 을 수신한 SHEM 을 이용하지 않는 노드는 수정된 Beacon packet 을 받더라도 오류를 일으키지 않는다. 그래서 현재 이용되고 있는 이동적응망에 즉시 적용이 가능해진다. IEEE 802.11 DCF-PSM 과 Hello packet exchange 방법을 사용하는 이동적응망은 전송할 데이터가 없더라도 노드의 수가 증가하는 것만으로 소모되는 에너지가 증가하게 된다. 하지만, SHEM 을 이용하면 오히려 노드의 수가 증가할수록 평균 에너지 소모량이 줄어들게 된다. 결국 기존의 방법보다 50%정도의 에너지를 절약할 수 있으며, 이는 노드의 life time 을 2배로 늘일 수 있는 정도의 수치이다.