Several phosphor printing processes have proposed to apply in the closed type cell and increase the definition. In this work, we proposed new printing process to increase the definition and production efficiency.
A new printing process for PDP phosphor powder depositing is proposed in this work by using the controlled fluids from gas blower, which is called gas blowing method for phosphor printing process. Gas blowing method is using the drag force from the air jet which has certain amount of momentum. This momentum is transferred to the phosphor paste which fills the hall in the donor plate. This momentum is exerted to the phosphor paste in the form of pressure. A variety of methods have been developed including Screen-Printing, Ink-Jet and Laser Induced Thermal Spray process. Compared of previous methods, the advantage of this method is that the composition ratio of phosphor material is not limited. Therefore, this method can transfer more amount of phosphor powder than the others, even if it transfers same amount of phosphor paste with the other methods. By the analysis of fluid, we found out that the phosphor paste transferred to the substrate by 2 kinds of mechanism, bridge mode and free-flight mode. We also have done the movement simulation of phosphor paste. The experiments have done by using 2 kinds of air blower, slit type and mask-aligned type. One distinctive point from the other methods is availability of mass production by transferring a number of phosphor paste holes for each sub-pixel.
밀폐형 격벽에 적용 가능하고, 높은 해상도를 가질수 있는 다양한 형광막 프린팅 공정이 개발되었다. 이 연구에서는 해상도를 높일 수 있고, 생산 효율을 높일수 있는 프린팅 공정을 제시하였다.
가스 분사기를 통해 제어된 유체를 분사시켜주는 방법으로써 PDP 형광 파우더를 도포할 수 있는 새로운 공정이 제시되었고, 가스분사법이라고 부른다. 가스 분사법은 가스 제트가 가지는 일정 운동량으로부터 발생되는 항력(Drag force)을 이용해서 분사시키게 된다. 이 운동량은 분사기판에 채워져 있는 형광페이스트에 가해지고, 페이스트를 내리누르는 압력으로 작용하게 된다. 스크린프린팅, 잉크젯, 레이저집중열원법과 같은 여러가지 도포공정이 제시되었고, 가스분사법은 이전 공정과 비교했을 때 페이스트 조성에 제한이 없다는 점이 장점이다. 따라서 같은 페이스트 양을 도포시키더라도 더 많은 양의 형광파우더를 이행시킬수 있다. 유체의 해석을 통해서 페이스트는 Brigde mode와 Free-flight mode 라는 두가지 방식으로 이행된다는 것을 알 수 있었다. 실험은 두가지 방법의 분사기를 사용하였는데 슬릿 형태와 정렬 형태이다. 다른 방법보다 뛰어난 점은 각각의 서브픽셀을 이루는 격벽에 형광체를 분사시킬 때, 한번에 많은 수의 형광체를 도포시킬수 있기 때문에 대량생산이 가능하다는 점이다.