The FIMS(Far-ultraviolet IMaging Spectrograph), the main payload onboard the first Korean Science Technology SATellite, STSAT-1, has performed various astronomical observations, including the Cygnus Loop, Vela supernova remnants, LMC(Large Magellanic Cloud), since its launch on September 2003. It has been found that the attitude information provided by spacecraft bus system has the errors of more than about 10-15 arcmins due to the time offset problem and errors in attitude knowledge. We develop an algorithm for correction of position errors in FIMS data. The aspect for the FIMS data is determined by comparing the positions of observed bright stars with the Tycho-II and TD-1 catalogs. The position errors of the bright stars along the scanning $(\gamma)$ and spatial $(\delta)$ directions were considered as functions of $\delta_1$ ignoring errors in position angle. The corrected positions of the bright stars coincided very well to their Tycho-II and TD-1 positions. The correction algorithm is essential for the FIMS data analysis, and is being used for the FIMS data analysis.
FIMS(원자외선 분광기, Far-ultraviolet IMaging Spectrograph; 또는 SPEAR)는 2003년 9월 27일 러시아 플라세츠크에서 발사되어 고도 800km에서 태양동기궤도를 돌고 있는 과학기술위성 1호(STSAT-1)의 주탑재체로써 Cygnus Loop, Vela supernova remnants, LMC(Large Magellanic Cloud) 등의 다양한 천문학적 관측을 수행하였다. 관측 수행 중에 위성체가 제공하는 자세 정보가 약 10~15 arcmins 이상의 오차가 있다는 것이 발견되었다. 그래서 FIMS data의 위치 오차를 보정하는 알고리즘을 개발하였다. Tycho-II와 TD-1 별목록의 별의 위치를 FIMS의 영상과 비교하여 위치를 결정짓는 방법을 선택하였다. position angle에 대한 오차는 무시하였고, FIMS의 스캐닝 방향을 기준으로 스캐닝 방향과 공간적 방향을 보정하였다. 보정 방법으로 횡 메르카토르 도법과 선형보간법이 주요하게 쓰였다. 보정된 이미지의 별의 위치는 Tycho-II와 TD-1 별목록의 별의 위치와 잘 맞아 떨어졌다. 별의 위치 뿐만아니라 공간적으로 분포되어 있는 여러 성간 물질도 모양도 날카로워지는 것을 볼 수 있었다. 이 위치 보정 알고리즘은 FIMS 자료를 분석하는데 필수적인 전처리 과정이고 FIMS의 모든 자료에 쓰여질 것이다.