In recent years, surface modification of solid suface is in the limelight as a new tool to connect macroscopic bulk properties and microscopic properties of materials. Of the known surface modification methods, self-assembly is being studied extensively because of ease of formation and its wide applicability. In this thesis, four kinds of surface active alkoxy silanes, {[4-(Diphenylamino)-phenyl]methoxy}-N-(4,4,4-triethoxy-4-silabutyl)formamide (TPA-CONH-Silane), [(9-Ethylcarbazol-3-yl)methoxy]-N-(4,4,4-triethoxy-4-silabutyl)formamide (Car-CONH-Silane), Diphenyl{4-[(11,11,11-triethoxy-11-silaundecyloxy)methyl]-phenyl}amine (TPA-Silane) and 11,11,11-Triethoxy-1-[(9-ethylcarbazol-3-yl)-methoxy]-11-silaundecane (Car-Silane) were synthesized using (3-isocyanato-propyl)triethoxysilane or platinum catalyzed hydrosilation method. Through the self-assembly onto both Si wafer and ITO, thin layers covalently linked to the substrates were formed successfully and they were characterized by contact angle measurement, AFM and XPS. To study the effect of self-assembled layers on electroluminescent (EL) characteristics of light-emitting devices, we fabricated light-emitting diodes using $Alq_3$ and MEH-PPV as emissive materials. The device configurations were ITO/TPD/$Alq_3$/LiF/Al in the case of $Alq_3$ based devices, and ITO/MEH-PPV/Al in the case of MEH-PPV based devices. Those devices using self-assembled layers showed enhanced EL characteristics than the devices using bare ITO.
자기조립박막 형성을 통한 고체 표면의 개질은 그 학문적 중요성과 다양한 응용가능성으로 인하여 최근들어 각광을 받고 있는 분야 중 하나이다. (3-이소시아나토프로필)트리에톡시실란 을 이용하여 우레탄 결합을 가지는 TPA-CONH-Silane, Car-CONH-Silane 을 합성하였고 말단의 이중결합을 백금 촉매를 사용하여 hydrosilation 반응시켜 TPA-Silane, Car-Silane 을 합성하였다. 이들 네 가지 실란 유도체 가운데, TPA-CONH-Silane 과 Car-CONH-Silane 은 흰 고체 상태로, TPA-Silane 과 Car-Silane 은 투명한 액체 상태로 얻었다. 합성한 실란 유도체들을 이용하여 실리콘 웨이퍼와 인듐틴옥사이드상에서 자기조립박막을 만들었고, 만들어진 박막은 접촉각측정, 원자현미경, X-선 광전자분광법 등으로 확인하였다. 자기조립박막이 입혀진 인듐틴옥사이드를 유기전기발광소자의 양극으로 사용하였고 이를 통해서 소자의 성능을 향상시킬 수 있었다. 대표적인 유기발광 물질인 $Alq_3$ 와 MEH-PPV 를 발광층으로 하는 전기발광소자를 만들어 실험한 결과, 자기조립박막이 입혀진 인듐틴옥사이드의 경우, 같은 전압에서 박막이 입혀지지 않은 것에 비해 더 많은 전류가 흘렀고 그에 따라 더 밝은 빛을 내는 것으로 관찰되었다.