The next generation mobile communication system such as IMT-2000 must support multimedia communications services as well as conventional voice service. So, 3GPP WCDMA system that is one of the IMT-2000 standards was designed considering packet operation. The data traffic has a burst transmission characteristics and the available resource is time-varying. In IMT-2000 system, the efficient use of the resource and QoS support for users are needed.
In this thesis, we propose the rate control method for throughput enhancement and different QoS support of each user in the 3GPP WCDMA system. We use the variable spreading factor for rate control in the 3GPP physical channel specification.
In the case that there is an available resource, the base-station increases the transmission rate of the user that has the higher priority and lower transmission power first. On the other hand, when the total interference of the cell exceeds the threshold, the transmission rate of the user that has the lower priority and higher transmission power is decreased first. Because the system capacity of DS-CDMA system is limited by total interference level, the inteference level of the other cell is considered in the case of the call admission and the increase of transmission rate.
The performance of the proposed rate control method is compared with that of other methods in which the transmission rate is determined at the call admission level and it is not changed during the data transmission. The simulation results show that the proposed method achieves high throughput and supports proper differentiation of user's QoS.
패킷 데이터 위주의 서비스가 될 IMT-2000환경에서는 주어진 무선 자원을 효과적으로 이용하고 단말의 서비스 QoS에 대한 차별화 방법이 필요하게 된다. 본 논문에서는 3GPP WCDMA시스템 환경에서 데이터 단말의 전송률을 클래스에 따라 가변 spreading factor 방식으로 조절하는 방법을 제안하였다.
셀 내의 용량이 남아 있을 경우 현재 전송중인 데이터 단말의 전송률을 높은 우선순위 단말의 송신 전력이 낮은 순서로 올려주며, 셀 내의 전체 간섭량이 임계치보다 증가 했을 경우에는 낮은 우선순위 단말의 송신 전력이 높은 순서로 내려주는 방법을 제안하였다. 또한 호 수락을 할 때와 전송률을 올릴 때에는 주변 셀로의 간섭 영향을 판단하여 주변 셀의 간섭량을 줄일 수 있도록 하였다.
제안한 방법은 초기에 최대 전송률을 허용하는 방식과 시뮬레이션을 통한 비교에서 단말의 전송률과 수율 면에서 더 좋은 성능을 나타내며 데이터 단말의 클래스별 QoS를 효과적으로 차별화 시킬 수 있었다. 그리고 전송률 제어 시간 간격이 짧을수록 더 좋은 성능을 보이는 것을 확인하였다.