Pervaporation characteristics of anionic PAA/PBMA IPN and semi-IPN membrane were investigated.
Anionic PAA/PBMA IPN membranes were prepared by sequential polymerization method and had thickness about 100 mm. This membranes had very high separation factor ranging from 10 to 511 with the ethanol concentration in feed, but had poor permeation rate ranging from 95 to 32 g/㎡hr. And Permeation rate of the IPN membrane increases and separation factor of the IPN membrane decreases with the increase of the $\bar{M}_c$ of the x-PAA part.
Anionic PAA/PBMA semi-IPN membranes with non-woven polyester fabric supporter were prepared by photo-polymerization and had thickness about 50 ㎛ of skin layer. This membrane has larger permeation rate but lower separation factor than that of anionic PAA/PBMA IPN membranes. For the case of phase separated semi-IPN, permeation rate was very high ranging from 597 to 826 g/㎡hr whereas separation factor was very poor ranging from 1.23 to 44.55. However, non-phase separated semi-IPN membranes had a good permeation rate ranging from 366 to 473 g/㎡hr and separation factor ranging from 2.69 to 90.8.
본 논문에서는 Anionic PAA/PBMA IPN 막과 semi-IPN 막에 대한 투과증발 특성에 관하여 살펴보았다.
Anionic PAA/PBMA IPN 막은 sequential polymerization 방법에 의해 제조하였으며 두께는 100㎛ 정도였다. 이 막은 10에서 511 정도의 높은 separation factor를 보였으나 95에서 32 g/㎡hr 정도의 낮은 permeation rate을 보였다. 또한, x-PAA의 $\bar{M}_c$가 증가할수록 permeation rate은 증가하고 separation factor는 감소하는 현상을 보였다. Anionic PAA/PBMA semi-IPN 막은 폴리에스터 부직포를 지지체로 사용하여 그 위에서 광중합을 이용하여 제조하였으며 두께는 50㎛ 정도였다.
이 막은 IPN 막에 비해 매우 높은 permeation rate와 낮은 separation factor를 보였다. 상분리가 있는 semi-IPN 막의 경우에는 597에서 826 g/㎡hr 정도의 매우 높은 permeation rate를 보였으나 1.23에서 44.55 정도의 매우 낮은 separation factor를 보였다. 한편, 상분리가 없는 semi-IPN 막의 경우는 366에서 473 g/㎡hr 정도의 permeation rate와 2.69에서90.8 정도의 separation factor를 보였다.