This paper introduces movable asset surveillance system based on IoT sensor network database. The main purpose of this system is to check whether the assets are in a fixed place, remotely. For this purpose, we use IoT system. IoT nodes are attached to those assets and collects sensor data. Total system tries to find dangerous event using that collected data. One example where this system can be applied is mortgage loan. In mortgage loan, movable collateral assets such as machines should be managed by the bank, since they are not allowed to move out of the factory. This suggested system can monitor whether machines are normally placed in the factory or not remotely and if machines moves out of the factory, this system can catch those event in a short time and give information to the bank. Main points to consider in this system is battery consumption and event recognition time. The battery consumption of IoT node should be low but at the same time system should catch dangerous event as soon as quickly. To improve this points, we apply sensor network database communication method to check event efficiently. In this paper, we introduces protocols, processes of suggested system which uses one of the sensor network communication method, PEQ, to communicate each other nodes and catch dangerous event data. Also, we make simulations to do experiment and analyze the result. As a result, this system improve event recognition time with less GPS sensor usage and less communication between server and each node.
본 논문은 이동식 자산의 움직임을 감시할 수 있는 감시 시스템을 IoT 센서 네트워크 데이터 베이스 기반으로 구현을 하였다. 이 시스템의 가장 큰 목적은 원격으로 자산이 정해진 장소에 자리하고 있는지 혹은 장소를 벗어나는지 감시하는 것이다. 이런 목적을 위해 IoT 시스템을 도입하였고 각각의 IoT 노드들이 자산에 부착이 되어 필요한 센서 데이터를 수집한다. 이런 시스템을 사용할 수 있는 대표적인 예시는 동산 담보 감시 시스템이다. 공장에서 가동하는 기계같은 동산 자산을 담보로 사용하는 동산 담보 대출 상품에서 기계 자산이 은행의 동의 없이 공장 밖으로 이동하는 것이 금지되어 있기 때문에 은행 담당자가 감시를 하여야 한다. 본 논문에서 제시하는 시스템을 토대로 그런 감시를 원격으로 할 수 있고 위험 상황 감지시 빠른 시간 안에 은행 담당자에게 해당 이벤트를 알리고 데이터를 전송할 수 있다. 이 시스템에서 고려해야될 중요 요소는 베어리 소모량과 이벤트 감지 시간이다. 각 IoT 노드의 배터리 소모량은 줄여야하고 동시에 위험 상황 이벤트를 빠르고 효율적으로 감시해야한다. 이런 점을 보안 하기 위해 본 논문에서는 센서 네트워크 통신 기법인 PEQ를 사용하여 노드의 통신을 구현하고 위험 상황을 감지하도록 프로토콜을 정의하였다. 정의한 프로토콜을 시뮬레이션을 통해 실험을 진행하였고, 진행 결과 GPS 사용량과 서버 통신량이 줄어들고 위험 감지 시간이 감소된 것을 확인하였다.