ElectroMagnetic Interference(EMI) noises incident from outside the system, such as aircraft and automobiles, are directly coupled to the external cable of the system or to the internal cable of the system through antennas and openings, thereby reducing the performance of the mounted equipment. A Twisted Wire Pair(TWP) wire is often used in systems to minimize these external EMI noises induced into cables of the equipment. Although numerical analysis methods based on the Maxwell equation such as FDTD and MoM analyze exactly the TWP, they are not suitable for use as the methods for the cable analysis because they require a lot of mesh to draw the TWP in three dimensions. Baum-Liu-Tesche(BLT) method based on electromagnetic topology environment, which is most commonly applied for the electromagnetic coupling analysis of cable networks, has faster calculation time than that of the numerical analysis methods because the transmission line theory is applied. However, because the TWP has nonuniform shapes repeatedly, If the BLT method is used to calculate the TWP, the dimensions of the propagation tube and scattering supermatrices rapidly increase and calculation time become longer as well.
In this paper, an improved BLT method using chain or chain scattering matrices was proposed to overcome the disadvantages the conventional BLT method and the response of the external EMI induced to the cross-shaped network over ground consisting of TWPs was analyzed. we compared results of the proposed method with those of the MoM and experiment and verified to show similar results each other.
항공기, 자동차 등 시스템 외부로부터 입사되는 전자기 간섭 노이즈는 직접적으로 시스템 외부에 있는 케이블로 또는 안테나 및 개구부 등을 통해 시스템 내부 케이블로 결합되어 탑재 장비의 성능을 저하시킨다 Twisted Wire Pair (TWP) 는 이러한 외부 전자기 간섭 노이즈가 탑재장비의 케이블로 유도되는 것을 최소화하기 위해 자주 사용 된다 Finite Difference Time Domain(FDTD) 및 Method of Moment(MoM) 과 같이 멕스웰 방정식에 기반을 둔 수치해석 방법 은 TWP 를 정확하게 해석한다 할지라도 TWP 를 3 차원으로 표현하기 위해 많은 메쉬를 필요로 하기 때문에 케이블 해석 방법으로 이용하기에는 적합하지 않다 케이블 네트워크의 전자기 결합 해석에 가장 많이 적 용되고 있는 전자기 토폴로지 환경 기반의 Baum Liu Tesche(BLT) 방법은 전송선 이론이 적용되기 때문에 수치해석 방법 보다 계산 시간이 빠르다. 하지만, TWP 는 반복적으로 비균일한 형상을 가지고 있기 때문에 TWP 를 계산하기 위해 BLT 방법 을 이용한다면 전송 튜브 및 산란 슈퍼 매트릭스들의 차원은 급격하게 커지게 되고, 계산 시간 또한 길어지게 된다.
본 논문에서는 기존의 BLT 방법이 가진 단점 들 을 극복하기 위해 체인 또는 체인 산란 매트릭스를 이용 한 개선된 BLT 방법을 제안하였고 외부 전자기 간섭 노이즈 가 접지 위에 TWP 들로 구성된 십자형 네트워크로 유도되는 응답 해석하였다 제안한 방법의 해석 결과를 검증하기 위해 MoM 및 실험 결과와 비교하였고 , 상호 유사한 경향을 보이는 것을 확인하였다