In this thesis detail design of microwave components and antenna is presented which were designed for SAR and radar project. A novel rotary joint for drone radar is presented. The rotary joint was used for interface between antenna and transceiver. The antenna and transceiver both had WR-75 interface and a rotary joint using multiple transitions from assymetric mode to symmetric mode is designed and presented. A symmetric mode TM\textsubscript{01} is used in centre waveguide which also includes the joint with a ball bearing mechanism. The problem of discontinuity for joint was solved with matching the length of slot at discontinuity to avoid impedance mismatching.
A gaussian antenna for air borne SAR application with very low sidelobes used in ViSAR is also given. The antenna was designed using hyperbolic and gaussian profiles and the mode content at apertures was adjusted to achieve low sidelobe and cross polarisation. The antennas used a corrugated surface with slot depth of $\lambda$/4 to achieve balanced hybrid condition in the profile and a transition of $\lambda$/2-$\lambda$/4 in the transition region for better impedance matching.
A slotted waveguide array for SAR applications is given using infinite periodic boundary model. A resonant slot array with centre inclined slots is used to feed the radiating aperture comprising of 12x16 antenna elements. Uniform aperture distribution is taken with centre inclined slots for maximum aperture efficiency. In addition to that a travelling wave slot array with progressive phase difference with $\pm$$45^{\circ}$ is also presented. A feeding network with a ferrite switch and a combination of hybrids and power dividers is presented.
An axially displaced ka-band reflector antenna is designed with no blockage from subreflector with a self supported feed system. A potter horn is designed with very low sidelobes is used to illuminate the sub reflector.
이 제안에서는 SAR 및 레이더 프로젝트를 위해 설계된 마이크로파 구성 요소 및 안테나의 세부 설계가 제시됩니다. 무인 항공기 레이더위한 신규 로터리 조인트가 제공된다. 로터리 조인트, 안테나 및 송수신기 사이의 인터페이스를 위해 사용 하였다. 안테나와 트랜시버는 모두 WR-75 인터페이스를 가지고 있으며 비대칭 모드에서 대칭 모드로의 다중 전이를 사용하는 로터리 조인트가 설계 및 제시되었습니다. 대칭 모드 TM\textsubscript{01}이 중앙 도파관에 사용되며 볼 베어링 메커니즘이있는 조인트도 포함됩니다. 조인트 불연속 문제는 임피던스 불일치를 피하기 위해 불연속 슬롯 길이를 일치시켜 해결되었습니다.
ViSAR에 사용되는 매우 낮은 사이드 로브를 가진 항공 운송 SAR 응용을위한 가우스 안테나도 제공됩니다. 이 안테나는 쌍곡선 및 가우시안 프로파일을 사용하여 설계되었으며 조리개에서의 모드 함량은 낮은 사이드 로브 및 교차 편광을 달성하도록 조정되었습니다. 이 안테나는 슬롯 깊이가 $\lambda$/ 4 인 주름진 표면을 사용하여 프로파일에서 균형 잡힌 하이브리드 조건을 달성하고 더 나은 임피던스 정합을 위해 전이 영역에서 $\lambda$/2-$\lambda$ / 4의 전환을 달성했습니다.
SAR 응용을위한 슬롯 형 도파관 어레이는 무한주기 경계 모델을 사용하여 제공됩니다. 중심 경 사진 슬롯을 갖는 공진 슬롯 어레이는 12x16 안테나 요소로 구성된 방사 개구를 공급하는데 사용된다. 조리개 효율을 극대화하기 위해 중앙 경사 슬롯으로 균일 한 조리개 분포를 얻습니다. 또한 $\pm$$45^{\circ}$의 점진적인 위상차를 갖는 진행파 슬롯 어레이도 제공됩니다. 페라이트 스위치와 하이브리드 및 전력 분배기가 결합 된 급전 네트워크가 제공됩니다.
축 방향으로 변위 된 ka-band 반사기 안테나는 자체 지원 피드 시스템을 사용하여 서브 리플렉터에서 막히지 않도록 설계되었습니다. 포터 혼은 매우 낮은 사이드 로브로 설계되어 서브 리플렉터를 조명하는 데 사용됩니다.