The Low Energy Electron Detector(LEED), which can measure the flux and analyze the energy spectrum of electrons in the auroral region, has been designed for instrumentation on board the KITSAT-B that is scheduled for launch on the 1st of September, 1993.
It consists of 4 parts : an electrostatic analyzer which analyzes the energy spectra of incident electrons, a spiraltron electron multiplier which detects electrons and makes the signal for each incident electron to be counted, high voltage power supplies for the electrostatic analyzer and the spiraltron electron multiplier, and the electronic circuits for the signal processing and the interface to the satellite.
It detects electrons up to 6650 eV in 16 steps with resolution of 20% (FWHM). Each step is 0.1 sec and sampling is made only during the last half of each step. Reset period of 1.6 sec comes after 1.6 sec sweep before the next sweep starts.
The geometrical factor that relates the number of particles detected during the sampling time to the differential incident flux is $1.8\times10^{-5}cm^2$ sr.
1993년 9월 1일 발사 예정인 우리별 2호에는 auroral region에 있는 전자들의 energyspectrum을 측정하기 위한 저에너지 전자 검출기인 LEED가 실릴 예정이다.
LEED는 크게 네 부분으로 이루어져 있다. 즉, 입사 전자의 에너지를 분석하는 analyzer와 전자를 검출하고 count될 수 있도록 신호를 만들어 내는 spiraltron electron multiplier와 고압 공급 장치, 그리고 신호 처리 부분과 interface 부분으로 이루어져 있다.
LEED는 20%의 분해능 (FWHM)을 가지고 16단계로 나누어 6650eV까지 측정을 한다. 각 단계는 0.1초이며 데이타는 그중 후반부에서 받아들여지도록 설계되었다. 또한 1.6초에 걸쳐 데이타를 받아들인 후 1.6초 동안은 쉬게되어 있다.
Geometrical Factor는 $1.8\times10^{-5}cm^2sr$ 이다.