Diffusivity of EG in melt and solid state PET was obtained by using the quartz spring sorption apparatus. The quartz spring has a maximum extension of 500mm and its corresponding maximum weight of 1 gram. The change of spring length was measured by Cathetometer with the accuracy of $10^{-4}$cm. The temperature of sorption apparatus was controlled by the silicon oil jacket.
Diffusivity of EG was determined by fitting iteratively the experimental data of sorption and desorption with the modeling developed to consider both diffusion and reactions simultaneously.
The diffusion coefficient of EG(Deg) in solid state PET is found to be proportional to the volume fraction of amorphous region of PET sample, and Deg is $2.75\times 10^8cm^2/sec$ at 230℃, $X_c$ = 0.373. The activation energy for diffusion in solid state PET is 51.8 kcal/gmol, which is slightly higher than that of melt state. In PET melt, diffusion coefficient of EG in the limit of zero-concentration is found to be $4.47\times 10^{-7}cm^2/sec$, and the activation energy for diffusion is 39.5 kcal/gmol. It is found that the diffusivity of EG for desorption is slightly larger than one for absorption, which results from the concentration effect of diffusivity. The heat of solution for sorption in PET melt is 54.7 kcal/gmol.
용융상 또는 고체상 PET속에서 EG의 확산계수를 quartz spring을 사용한 sorption 실험장치에서 측정하였다. 여러가지 부반응들을 포함한 반응들과 확산을 동시에 고려한 모델을 개발하여 모델링으로부터 계산한 결과와 실험 data를 비교함으로써 EG의 확산계수를 구하였다. 고체상 PET속에서 EG의 확산계수는 PET의 amorphous 영역의 부피분율에 비례함을 알수있었으며 230℃ 결정화도가 0.373일때 EG의 확산계수는 $2.75\times 10^{-8}cm^2/sec$였다. 고체 상 PET속에서 확산에 필요한 활성화 에너지는 용융상에서의 그것보다 더 큰 값인 51.8kcal/gmol 이었다. 용융상 PET에서 EG의 확산계수는 265℃에서 $4.47\times 10^{-7}cm^2/sec$ 이었으며 확산에 필요한 활성화 에너지는 39.5kcal/gmol 이었다. Desorption 실험에서 구한 확산계수가 sorption 실험에서 구한 값 보다 약간 크게 나왔는데 농도에 의한 영향 때문이라고 생각 되었다. 용융상 PET에서 용해열은 54.7kcal/gmol 이었다.