We suggested simple polymerization methods of lacquer sap to fabricate the urushiol powder with sufficient antimicrobial activity and thermal stability. Additionally, the urushiol-ABS composite was prepared by coating urushiol powder on ABS surface. This method maximizes the antimicrobial property and minimizes the degradation of mechanical properties of ABS resin. Urushiol which is main component of lacquer sap has good properties such as good durability, thermal stability and antimicrobial activity. However, practical use of liquid urushiol has a difficulty due to the allege reaction of skin. To overcome these limitation, we polymerized lacquer sap by laccase-catalyzed reaction or adding heat under three specific conditions. Also, the produced urushiol powders were analyzed by Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analyzer (TGA), optical microscope (OM) and antimicrobial test against Gram-positive bacteria such as S.aureus. The urushiol powders exhibited 99.99% antimicrobial activity and high thermal stability to be used as plastic additives. Two types of urushiol-ABS composite were produced by mixing the urushiol powder with ABS or coating on ABS surface with the urushiol powder. In addition, we demonstrated that the urushiol-ABS composites could be used as antimicrobial interior material of electronics by analyzation of their mechanical and antimicrobial properties.
우루시올은 옻나무 수액의 주성분으로 내구성, 항균성, 내열성 등 뛰어난 성질과 함께 단량체일 때 피부 알레르기를 유발하는 단점을 가지고 있다. 본 논문에서는 우루시올이 중합체가 되면 알레르기를 일으키지 않는다는 점에 착안하여, 간단한 우루시올 중합법을 개발하고 우루시올을 분말을 제조하였다. 그리고 진탕 플라스크 항균시험과 TGA 분석을 통해 제조된 우루시올 분말이 황색포도상구균에 99.99% 항균 효과를 가지며 항균 플라스틱 첨가제로 사용하기에 충분한 열 안정성을 가지고 있음을 확인하였다. 제조한 우루시올 분말의 형태와 크기, 화학 구조는 광학현미경과 FT-IR로 분석되었다. 응용을 위하여 우루시올 분말을 ABS전체에 혼합하거나 표면에만 코팅하여 두 가지 유형의 복합소재를 제작하고 항균 특성과 기계적 물성을 비교하였다. 그 결과 ABS 표면만 우루시올 분말로 코팅했을 때, 항균효과는 극대화되고 기계적 물성 저하는 최소화 됨을 확인할 수 있었다.