Transparent electrode, as an important component in various kinds of electronic devices including touch panel, solar cell, and display, has attracted much attention. Commercially used indium tin oxide (ITO) exhibits excellent electrical and optical properties but suffers from brittleness due to its oxide nature. With rising demands for flexible electronics, flexible transparent electrode has been researched to replace ITO, for example conducting polymer, graphene, metal nanowires and metal grids. Among them, metal grid shows good optical and electrical properties because of its highly organized structure and metal is highly conductive. Electrohydrodynamic (EHD) printing is an efficient and high precision technique that is suitable in metal grid patterning. In this study, copper grid embedded polyimide thin film was fabricated using EHD printing, wet etching, and embedding techniques, and electrical and optical properties were examined. Copper grid shows optimal performance of $15 \Omega /sq$ sheet resistance and 95% transmittance with $5 \mu m$ wire diameter and $200 \mu m$ pitch. Aging test demonstrates the thermal and long-term stability of sample and bending test proves the desired flexibility and bending stability of embedded thin film. The fabricated embedded polyimide was tested for the application of heater and it shows stable heating capability.
투명 전극은, 터치 패널, 태양 전지, 및 디스플레이를 포함하여 전자 장치의 다양한 종류에 중요한 성분으로서 많은 관심을 받고있다. 상업적으로 사용되는 인듐 주석 산화물 (ITO)는 우수한 전기 광학적 특성을 발휘하지만, 취성에서 인해 산화 특성 겪고있다. 가요 성 전자 기기 수요 증가 유연한 투명 전극은 예컨대 전도성 중합체, 그라 금속 나노 금속 그리드, ITO를 대체하는 연구가되어왔다. 그 중에서도, 금속 격자 때문에 고도의 조직 구조의 좋은 광학 및 전기적 특성을 보여줍니다 금속은 높은 전도성이다. 특히 전기 (EHD) 인쇄는 금속 격자 패턴에 적합한 효율적이고 정밀도가 높은 기술이다. 이 연구에서, 구리 격자 매립 폴리이 미드 박막 기술 EHD 인쇄, 습식 에칭을 이용하고, 매립 제작하고, 전기적 및 광학적 특성을 조사 하였다. 구리 그리드는 $5 \mu m$ 와이어 직경 $15 \Omega$ / 스퀘어 시트 저항과 95 %의 투과율 및 $200 \mu m$ 의 피치의 최적의 성능을 나타낸다. 테스트를 노화 샘플의 열 및 장기 안정성을 보여줍니다 및 테스트를 굽힘 원하는 유연성 및 임베디드 박막의 굽힘 안정성을 증명한다. 제조 된 폴리이 미드 히터 내장의 적용에 대해 시험하고, 안정된 가열 능력을 나타낸다.