The Becker type thermal leakage correction incorporated into KINS2 ( KAERI Improved Nodal System Version 2 ) has been found to have a tendency to overestimate the thermal flux transients which occur at the interfaces of nodes having different material compositions. This is because ,in the Becker type correction, the thermal transients occuring at the each interface of a three dimensional node are estimated by one dimensional diffusion theory and the overall thermal leakage of the node is represented by the simple summation of the one dimensional results.
In this thesis, a new method for the thermal leakage correction was developed to improve the accuracy of the Becker type correction. Some features of the new method could be summarized as follows.
Firstly, in the new method the effect of the fast neutron leakage which is neglected in the Becker type correction, is accounted for, more accurate thermal-to-fast flux ratio at the node center can be obtained.
Secondly, in order to diminish the overestimation of the thermal transients, the overall thermal transients of a three dimensional node are represented by the weighted relation between the node center flux ratio and the six facial flux ratios of the node.
The new method was applied to the analysis of the KNU-1 Cycle-1 BOC core. The results show that the new method predicts more accurately the nodal flux ratio distribution and the nodal power distribution than the Becker method, and that the new method can be used to improve the calculational accuracy of one group nodal simulators.
KINS2 에 적용된 Becker 형의 열속 누출 보정방법은 특별히 물질 특성이 아주 다른 두 노드 경계면에서 일어나는 열속 천이 현상을 과대 평가하는 경향을 보여왔다.
이는 Becker 형의 보정 방법이 각 노드 경계면의 열속 천이현상을 1차원 확산이론을 적용하여 계산하고 3차원 노드 전체의 열속 누출을 나타내기 위해 이 일차원 열속 천이 계산 결과를 단순 합산함으로써 발생 한다.
본 논문에서는 Becker 형의 열속 누출 보정 방법을 개선하여 더 정확히 열속 천이현상을 취급할 수 있는 새로운 열속천이 취급 방법이 제시되었다.
먼저, 이 새로운 방법은 Becker 형의 보정 방법에서 무시한 노드 중심의 속중성자속 누출을 고려하여 노드 중심의 중성자속비를 더 정확히 계산하였고, 또, 가중치를 도입하여 노드중심의 중성자속비와 각 표면의 중성자속비를 이 가중치를 써서 합산함으로써 일차원 결과를 단순 합산함으로 생겨나는 열속천이의 과대평가를 개선하였다.
새로운 방법을 고리1호기 제1주기 주기초 노심계산에 적용한 결과 Becker형의 보정방법보다 노심의 중성자속비의 분포를 더 정확히 예측하는것으로 나타났다. 또 이 새로운 열속천이 취급방법을 적용하였을 때 노심의 출력분포가 상당히 개선됨을 보임으로써 새로운 방법이 1군 노달계산의 정확도를 개선하는 목적으로 쓰여질 수 있음을 보였다.