This thesis presents an interactive design and NC code generating system for a class of turned parts whose geometries can be specified with 2D lines and circulararcs. Using the interactive graphics commands, the part geometry can be conveniently defined in 2D and NC machine instruction codes are automatically generated from the analysis of 1D geometry. It also enables a user to visually verify the tool motion by means of animated display of the cutting tool path that has been generated at an intermediate step. FANUC M6A is used as target NC machine.
The system has been implemented using "C" language on the VAX 11/780 running under 4.2 BSD UNIX operating system with Tektronix 4105 color graphics terminal.
본 논문에서는 회전체 부품에 대한 대화식 설계 및 설계된 부품 데이타로 부터 얻어진 NC 명령문을 검정하기 위한 시스템을 구축하였다.
이 시쓰템은 크게 나누어 대화식 설계 부분, 공구 경로의 생성 부분, NC 명령문 생성 부분으로 구성 되어 있고, 모든 데이타의 입출력은 Tektronix-4105 그래픽 터미날을 이용하여 대화식으로 이루어진다.
또한, 사용자는 이러한 시쓰템을 이용하여 보다 편리하게 부품을 설계할 수 있으며 부품의 모양과 공구경로를 그래픽 터미날에 보여 줌 으로써 확인 검정을 할수 있다.
본 시쓰템은 C 프로그래밍 언어를 사용하여 4.2 BSD UNIX 운영 체제를 쓰는 VAX-11/780 컴퓨터에 실현시켰다.