Inorganic-organic hybrid lead halide perovskite solar cells have recently become the center of photovoltaic research due to their remarkable progress in the past few years. With efficiencies now over 20 %, many researchers have begun to believe that perovskite solar cells may be able to challenge the silicon solar cell industry as perovskite solar cells offer promising prospects on both producing higher efficiencies and on having significantly lower manufacturing costs. However, fundamental understanding of the physics involved in perovskite solar cells is still very much in its early stages when compared to its efficiency. Studies on the physical reasoning behind different process conditions have been insufficient. This report studies the effect of process conditions on the formation of $CH_3NH_3PbI_3$ perovskite absorber layer and, consequently, on final device performance. Analysis using KPFM and c-AFM provided fundamental evidence to suggest that the annealing of the $PbI_2$ layer plays a critical role in effective charge separation and thus superior device performance. An attempt was made to change the absorber morphology from cuboid to thin film. However, preliminary results showed that changing the perovskite morphology resulted in decreasing efficiency to some extent. Further research is required to optimize these layers
본 연구에서는 페로브스카이트($CH_3NH_3PbI_3$) 광흡수층 공정조건의 변화가 필름에 미치는 영향과 이 흡수층을 기반으로 만들어진 태양전지의 성능에 대해서 연구하였다. KPFM과 c-AFM을 기반으로 한 분석은 $PbI_2$ 층의 열처리가 효과적인 전하 분리와 디바이스 효율에 결정적인 역할을 한다는 사실에 대한 기초적인 단서를 제공해 주었다. 그리고, 광흡수층의 형태를 큐보이드 구조에서 박막으로 바꾸려는 시도를 하였지만 실험 결과 페로브스카이트 형태의 변화는 일정 수준의 효율의 감소를 초래한다는 사실을 확인하였다. 결론적으로, 이 흡수층의 최적화를 위해서는 추가적인 연구가 시행되어야 한다