Tissue engineering has progressed to development of scaffolds which provide solutions to osteoarthritis, osteoporosis, or other bone related diseases. The scaffold plays role as temporary support for cell proliferation and extracellular matrix deposition which leads to the regeneration of newly formed tissue. Electrospinning is a versatile technique which has gained popularity in nanoscale properties and technology. We utilized this method to synthesize composite fibers of chitosan/poly(vinyl alcohol) (PVA) and calcium carbonate as reinforcement. Cubic nanosize calcium carbonate was incorporated within electrospun fibers and resulted in improvement of fiber diameter, Young’s modulus to 912.5±60.6 MPa and suitable for the growth of chondrocytes. Web-like connection of nanofibers among electrospun fibers was produced by incorporating ellipsoidal calcium carbonate in electrospun chitosan/PVA. Ultrafine nanofibers with most distribution around 30-35 nm were produced and Young’s modulus value reached 432.4±94.3 MPa. The apatite growth on surface of chitosan/PVA and chitosan/PVA with calcium carbonate showed similar trend in increasing particle size. Further incorporation of calcium carbonate among electrospun chitosan/PVA was through layered structure of calcium carbonate and chitosan/PVA fibers which is inspired by structure of nacre. The morphology of calcium carbonate in layered structure was controlled by drying condition and addition of crosslinking agent. The layered disk-like calcium carbonate was produced when material was dried under air. The ultimate stress value of layered material reached 44±3.2 MPa and Young’s modulus value reached 2328.4±204.9 MPa.
조직 공학 은 골관절염, 골다공증, 또는 다른 뼈 관련 질병 에 대한 해결책을 제공하는 비계의 개발 을 진행하고있다 . 발판 은 새로 형성된 조직 의 재생 을 유도 세포 증식 및 세포 외 기질 증착을위한 임시 지원 등의 역할을한다. 전기 방사 는 나노 스케일의 특성과 기술 에 인기를 얻고있는다양한 기술이다. 우리는 키토산 / 폴리 (비닐 알코올 ) (PVA) 및 보강재 , 탄산 칼슘 등 의 합성 섬유 를 합성 이 방법을 이용했다. 큐빅 나노 크기의 탄산 칼슘 은 전기 방사 섬유 내에 통합 및 섬유 직경 , Young의 912.5 ± 60.6 MPa의 행 계수 및 연골 의성장 에 적합한 개선 초래 하였다 . 전기 방사 섬유 중 의 나노 섬유 웹 형상 연결은 전기 방사 된 키토산 / PVA 의 타원면 탄산 칼슘 을 혼입 하여 제조 하였다 . 가장 분포 초미립자 나노 파이버 는 약 30 내지 35 nm 인 제조 하였다 영률 값은 432.4 ± 94.3 MPa로 도달 . 키토산 / PVA 키토산 / 탄산 칼슘 의 표면에 PVA아파타이트 성장은 입자 크기를 증가시키는 유사한 경향 을 보였다. 전기 방사 된 키토산 중에서 탄산 칼슘 의 추가의 혼입 / PVA 는 탄산 칼슘 과 키토산 / 진주층 구조 영감 PVA 섬유의 적층 구조를 통해 이었다 . 적층 구조에서 의 탄산 칼슘 의형태 및 조건 은 가교제 의 첨가 에 의해 제어 건조 하였다 . 물질을 공기 하에 건조 할 때적층 디스크 형 탄산 칼슘 을 제조 하였다 . 적층 재료의궁극적 인 스트레스 값은 44 ± 3.2 MPa의 도달 및 영률 값은 2328.4 ± 204.9 MPa로 도달 .