We present an end-to-end available bandwidth estimation algorithm using self-induced congestion approach, one-way delay and measured traffic load.
Broadband Convergence Network(BcN) is an integrated realization of Next Generation Network(NGN) where one can make use of quality guaranteed multimedia service such as broadcasting, telecommunication and internet at any time, any place. When customers are connected with each other through the best-effort network as well as BcN, it is hard to guarantee Quality of Service (QoS) over the best-effort network. Therefore, it is necessary to estimate accurate end-to-end available bandwidth to support end-to-end QoS.
The available bandwidth measurement has been an important part in traffic management. Knowing the amount of available bandwidth is useful for many purposes. For example, end-to-end admission control, server selection, optimal route selection, congestion control and service level agreement verification are performed based on the result of available bandwidth estimation.
To address this issue, we use measurement algorithm, which are performed on the terminal equipment, and delay model. In addition, the concept of the proportional share of link capacity is used for estimating end-to-end available bandwidth.
For evaluating our method in terms of measurement latency and accuracy, we compare simulation results of our proposed algorithm with the one of conventional method.
차세대 네트워크로서 떠오르는 BcN은 방송, 통신, 인터넷이 융합된 품질보장형 광대역 멀티미디어 서비스를 언제 어디서나 끊김 없이 안전하게 이용할 수 있는 통합 네트워크를 말한다. 따라서 BcN 환경에서는 단대단 서비스 품질을 보장할 수 있다. 하지만, BcN을 이용하는 사용자와 기존의 IP망을 이용하는 사용자 사이에서 통신이 이루어질 때 IP망의 특성으로 인하여 단대단 품질 보장은 어려워진다. 이러한 경우, IP망과 BcN 두 망을 모두 거치는 단대단 가용대역폭 측정은 스트리밍 서비스, 접속 제어, 서버 선택, 오버레이망에서의 경로 선택, SLA확인 등에서 유용한 정보를 제공해 줄 것이다.
기존에 연구된 단대단 가용대역폭 측정은 정확도가 떨어지거나 특정 환경하에서만 동작할 수 있거나 측정 지연 시간이 길었다. 이와 같은 단점을 극복하기 위하여 본 논문에서는 기존의 방법보다 정확하면서 좀 더 빠른 시간내에 단대단 가용대역폭을 측정하는 방안에 대하여 연구하였다.
가입자간에 주고 받는 패킷의 단방향 지연시간은 트래픽이 최소 가용대역폭보다 큰 대역폭으로 지나갈 경우 증가하고, 수신단에서의 측정 속도가 발신단에서의 측정속도보다 감소한다는 사실에 기초하여 방법을 제시하였다.
이 방법의 검증을 위해서 시뮬레이션을 통하여 최소 가용대역폭을 변화시켜가며 측정 결과를 기존의 방법과 비교하여 살펴보았다.