Optical disk is a data storage medium of the highest density. That medium is widely used for CD(Compact Disk) and DVD (Digital video disk or digital versatile disk) players as ROM/RAM (Read only memory/random access memory) drives. In this paper, PDIC for 52X CD-ROM is designed. Optical pickup system needs wide bandwidth and good noise performance. It needs the operation bandwidth of over 100MHz, which is realized by using the high frequency gain boosting operation at the post amplifier. By using common emitter type trans-impedance amplifier as a preamplifier, a good noise characteristic is obtained. The output stage is designed as a class-AB operation by enhancing sinking operation. PDIC requires very tight output offset specification, which is realized by modified negative feedback skill. The $V_{BE}$ reference is used for supply independent current source. The total current consumption at the idle state is under 17mA. The group delay for A~D and RF channel is under 1ns. The PDIC on this paper is designed by using Sanyo BJT process, which provides two supply voltages (5V, 2.5V), on-chip P-I-N photo diodes and bipolar transistors. The npn transistor’s maximum $f_T$ is 8GHz and 2GHz for pnp transistor.
이 논문에서는 Si-Bipolar 공정을 써서 52배속 이상의 CD-ROM에 적용되는 광 검출 회로의 설계를 보였다. 광 검출 회로는 100MHz 이상의 고속 동작과 깨끗한 노이즈 특성, 그리고 정확한 출력 offset 사양을 요구한다. 따라서 개선된 공통 에미터 타입의 전류-전압 변환 증폭기를 이용하여 전치 증폭기를 구현하였고, 출력 offset을 줄여주기 위한 별도의 부궤환 회로가 최종 증폭단에 추가되었다. 또한 출력단의 전류 구동 능력을 향상시켜 주기 위해서 개선된 class-AB 출력단 회로를 추가하였다. 또한 전원 전압의 변동에 둔감하도록 Vbe 기준 전류원을 사용하여 구현하였다. 본 논문에서 사용한 공정은 npn(ft=8GHz), pnp(ft=2GHz)의 최대 주파수 특성을 갖는 바이폴러 공정이다. 모의 실험 결과, 200MHz의 차단 주파수 특성을 보였고, 15mA의 전체 전류 소모 특성을 보였다.