A new measurement system of wall pressure fluctuations on a rotating machinery, composed of digital recording device, was developed and evaluated. The small-sized digital recording device was attached on the rotating machinery and then was detached for data reduction. In order to obtain the system transfer function of the digital recording system, a dynamic calibration was performed utilizing the signal from a 1/8 inch B&K microphone as input. The time history of the unsteady pressure was then reconstructed from the output of the sensor by using this transfer function. The reconstructed pressure signals showed good agreement with the reference signal in both temporal and spectral sense. This sensor was then used to measure the wall pressure fluctuations on a rotating blade. An array of microphones were installed on the blade in the circumferential and radial directions. Various statistical moments were obtained from the measurement data set. Comparison of these quantities with the existing studies demonstrated satisfactory agreement. these tests give credence to the relevance and reliability of this device for applications in more complicated turbulent rotating machineries.
디지털 저장장치를 이용하여 회전중인 블레이드 표면의 벽 압력섭동을 측정하는 새로운 방법을 제시하였고 시험하였다. 소형의 디지털 저장 장치를 회전체에 부착하여 실험하였고 탈착시켜서 데이터를 처리하였다. 디지털 저장 시스템의 전달함수를 구하기 위해서 1/8 인치 B&K 마이크로폰의 신호를 입력으로 하는 동적 캘리브레이션이 수행되었다. 이 전달함수를 이용함으로써 비정상 압력섭동의 시간역 신호가 디지털 저장장치의 출력신호로 부터 재구성되었다. 재구성된 신호는 기준신호와 비교할 때 시간적, 스펙트럼적인 면에서 일치하였다. 이 저장장치는 회전중인 블레이드의 벽압력섭동을 측정하기 위해서 사용되었다. 마이크로폰을 블레이드 표면상에 원주방향과 반경방향으로 배열하였다. 측정 후 여러 종류의 결과가 얻어졌다. 이러한 결과들을 기존의 연구와 비교하였을때 일치하였다. 이러한 시험으로 디지털 저장 장치를 이용하는 이 방법은 더 복잡한 난류 회전체에 적용하여 측정할 수 있으며 얻은 결과는 신뢰가능하다는 것을 보여준다.