High speed internet services using existing Category-3 UTP( Unshielded Twisted Pair) cable are restricted up to 200m when Hub and PC are directly connected. To extend upper communication reach limit, we must use auxiliary transceivers which are somewhat expensive and bulky. The reason for this short range communication without auxiliary transceivers results from non-ideal transmission characteristics (both magnitude & phase) of Category-3 UTP cable.
By thorough investigating cable transmission characteristics, we found the fact that there are some means to compensate signal distortion exactly and realized long-distance (up to 1km) communication using only single I.C. without any auxiliary components.
To compensate signal distortion, we used zero-frequency control method. The zero-frequency control method can be divided in two categories roughly (feed-back & feed-forward). I investigated feed-forward control method and implemented in Integrated Circuit.
In this thesis I will introduce basic equalization principles and explain the detailed circuit and its operations.
기존에 존재하는 전화선(UTP,category3)을 이용해서 장거리(1km) 고속데이터전송(10Mbps)하기 위해서는 허브와 PC 사이에 별도의 어댑터를 설치하여야만 했다. 별도의 어댑터의 고가인 것과 외부에 장착해야하는 문제점을 해결하기 위해서 본 논문에서는 디지털처리를 거치지 않고 전화선의 왜곡특성을 정확하게 분석한 후 이를 보상하기 위해서 필요한 아날로그 회로를 CMOS로 구현하였다. 이렇게 함으로써 별도의 장비를 사용하지 않고 기존에 설치된 전화선을 이용해서 장거리 고속데이터전송을 가능하게 되었다. 또한 전화선의 거리에 따른 능동적인 보상을 위하여 입력신호의 크기로 부터 전화선의 거리정보를 추출하기 위한 조건과 이를 구현한 회로를 설계하였다.